Glass Plus

DESCRIPTION:
Ready-to-use adhesive dedicated to fiberglass wallpapers and heavy wallpapers with a grammage above 420g/m2. Pronicel guarantees a durable and very strong bond of wallpaper and photo wallpapers to the wall. The joint is transparent after drying. Before you start wallpapering, please read the wallpaper manufacturer’s recommendations. It can be used on lime-cement plasters and plasterboards indoors.

SUBSTRATE PREPARATION:
Before wallpapering, carefully remove any roughness, adhesive paint and wallpaper residues from the surface. The walls should be dry, clean and uniformly smooth. In the case of crumbling substrates, the unstable parts of the substrate should be removed and the defects filled with filler. Highly absorbent surfaces should be primed using PRONICEL PRIMING EMULSION or GLASS PLUS glue diluted with water (max 10% water) and then left to dry.

HOW TO USE:
Mix the glue thoroughly before use. Apply the glue using a roller or brush to the cleaned and prepared wall surface for wallpapering. Then, smear the wallpaper pieces with glue and fold them inwards so that the wallpaper soaks up the glue. In the case of non-woven wallpapers, apply dry wallpaper on a previously glued wall. Glue the wallpaper strips (boards) butt together. The joints of the wallpaper strips (pieces) should be pressed with a roller. Remove excess glue with a damp cloth or sponge.

STORAGE:
Store at a temperature of 5° C – 25° C in a dark and dry place, in a tightly closed original packaging. Keep away from children.

SAFETY:
Product treated with a biocidal product. Contains C(M)IT/MIT (3:1) Contains the reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1) and 1 ,2-benzisothiazole 3(2H)-one. May cause an allergic reaction.

Technical data: